Product Description
The CR 44501 load roller bracket is a pair of metal brackets holding the load rollers on your pallet jack. The load roller bracket is an essential component that ensures the proper alignment and balance of the load rollers, affecting the performance and safety of your pallet jack. This load roller bracket is compatible with the original equipment manufacturer (OEM) part number 44501 or CR44501. The CR 44501 load roller bracket is high-grade steel that can withstand heavy use and wear and tear.
Cross References |
Crown 44501, CR44501, 44501 |
Product Specifications
Part Type |
Aftermarket Load Roller Bracket |
Make |
|
Manufacturer Part Number |
CR 44501 |
Model |
|
Section |
Frame |
Component Quantity |
Pair |
Condition |
New |
Features and Benefits
- Precision engineering: It is manufactured with precise dimensions and tolerances that ensure a perfect fit and alignment with your pallet jack's frame and load rollers.
- Enhanced durability: Its corrosion-resistant finish protects it from rust and damage, increasing strength and stability.
- Easy installation: You can replace your old or damaged load roller brackets in minutes with minimal downtime.
- Optimal performance: It improves the performance and efficiency of your pallet jack by ensuring smooth and even movement of the load rollers.
- Cost-effectiveness: You can save on maintenance and repair costs by investing in a quality replacement part that will last longer and perform better than cheaper alternatives.
Recommended Use/Applications
The CR 44501 load roller bracket is recommended for use with the Crown PTH50 (NEWER) pallet jack.
Stock Availability
- In stock & ready to ship
Warranty Information
It comes with a 1-year limited warranty.
Not Sure Will This Part Fits Your Equipment?
If you are unsure whether the CR 44501 load roller bracket will fit your Crown PTH50 (NEWER) pallet jack, or if you have any questions or concerns about the product, please do not hesitate to contact us. We are here to help you find the right part for your pallet jack and ensure your satisfaction.
You can reach us through any of the following channels:
- Phone: 832-239-5393
- Email: info@palletjackson.com
- Live chat: available from Monday to Friday, 9 am to 6 pm EST
Our friendly and knowledgeable customer service team will be happy to assist you with any inquiries or issues.
Frequently Asked Questions
Q: How many CR 44501 load roller brackets do I need for my pallet jack?
A: You need two load roller brackets for your pallet jack, one for each load roller.
Q: How do I install the CR 44501 load roller bracket on my pallet jack?
A: You will need a wrench, a hammer, and a punch to install the CR 44501 load roller bracket on your pallet jack. Follow these steps:
- Lower the forks of your pallet jack to the ground and secure the steer wheel brake.
- Remove the cotter pins and washers that hold the load roller axle in place.
- Tap out the load roller axle from the frame using a hammer and a punch.
- Remove the old load roller brackets and load rollers from the axle.
- Slide the new load roller brackets and load rollers onto the axle, ensuring they are aligned with the holes in the frame.
- Insert the axle back into the frame and secure it with washers and cotter pins.
- Test the movement of the load rollers and adjust as needed.
Q: How do I know if my load roller brackets need to be replaced?
A: If you notice excessive wear and tear, cracks, or any signs of damage on the existing load roller bracket, it's advisable to replace it promptly to ensure the safe operation of your pallet jack.
Q: Is the CR 44501 Load Roller Bracket compatible with older Crown PTH50 pallet jack models?
A: The CR 44501 load roller bracket is specifically designed for the newer Crown PTH50 pallet jack version. Compatibility with older models may vary, so it's essential to verify compatibility before purchasing.
Q: What should I do if I encounter any issues after installing the CR 44501 load roller bracket?
A: If you experience any issues such as unusual noises, difficulty maneuvering the pallet jack, or other abnormalities after installing the CR 44501 load roller bracket, discontinue use immediately and consult a qualified technician for inspection and repairs.
Frequently Bought Together
Customers who buy the CR 44501 load roller bracket will also be interested in these products:
- GWKPTHCK Complete Wheel Kit Pth Ultra Poly 70d
- CR 44499 Steer Wheel Axle Crown PTH50 (NEWER) Pallet Jack Hydraulic Unit
- CR 45676 Axle Crown PTH50 (NEWER) Pallet Jack Frame
CR 44501 Load Roller Bracket Crown PTH50 (NEWER) Pallet Jack Frame
CROWNSKU: CR 44501
Product reviews (0)
Overall rating:
Purchased this product? Let us know your feedback by logging in to your account.