CR-44500-001 Load Wheel Bracket Assembly for Crown PTH50 Pallet Jack

Cross References

This load wheel bracket assembly may also be found under alternate part numbers: 

Product Specifications

Features of this Product:

• Complete assembly including the bracket, one polyurethane load wheel with pre-installed bearing, axle, and fasteners.
  
  

• Robust steel bracket construction to handle full pallet loads and resist bending under heavy use.
  
  

• Wheels come with pre-installed sealed bearings, and the kit includes bushings and axle roll pins, ensuring proper alignment and reducing installation time.
  
  

• Direct-fit design for Crown PTH50 (newer model) pallet jacks – guarantees correct mounting hole positions and fork compatibility for serial numbers 7-512501 and above.
  
  

• Restores original handling performance by replacing all worn components at once, resulting in consistent fork height and stable load support.
  
  

• Engineered to evenly distribute load weight across both rollers, reducing strain on each wheel and extending service life.
  
  

• Manufactured to OEM specifications for wheel diameter, width, and hardness, ensuring the pallet jack maintains proper lifting height and load capacity after installation.
  
  

Warranty Information

This aftermarket Crown load wheel bracket assembly comes with a 1-year limited manufacturer's warranty, protecting against defects in materials and workmanship. It is built and tested to perform to OEM standards throughout the warranty period.

Stock Availability

In stock and ready to ship.

Our Return & Refund Policy

Returns are accepted within 30 days of purchase. The item must be returned unused, in original packaging and condition, with proof of purchase (receipt) to qualify. 

If the return is due to a change of mind and not a defect, a 20% restocking fee will apply to the refund amount. Please refer to our Refund Policy for complete details and instructions on initiating a return.

Not Sure If This Part Fits Your Equipment?

If you are uncertain about compatibility with your pallet jack, our team is here to help. 

Reach out via phone at 832-239-5393 or 1-800-210-8170, email info@palletjackson.com, or live chat (Monday–Friday, 9 am – 6 pm EST). 

We’ll ensure you get the right part for your Crown jack or guide you to the appropriate component if this one isn’t a match.

Frequently Asked Questions

Q: What does the load wheel bracket assembly do on a pallet jack?

A: The load wheel bracket assembly is the component at the tip of each fork that holds the small load wheels. It allows the wheels to pivot slightly and supports the fork when lifting a load. 

Q: Why replace the entire bracket assembly instead of just the wheels?

A: Replacing the whole assembly ensures that all wear points are renewed at once. Over time, not only do the polyurethane wheels wear out, but the axle, bearings, and even the bracket holes can become worn or elongated. By installing a complete assembly, you get a new bracket with correct geometry, new axle and hardware, and new wheels with bearings. This restores the fork end to like-new condition. Simply swapping wheels might not fix issues like a bent bracket or worn axle that could cause premature wheel wear or poor performance. The complete assembly replacement is often more efficient and ensures longevity.

Q: How can I tell if my pallet jack’s load wheel bracket assembly is worn out?

A: There are a few telltale signs: If you notice excessive wobbling or slop in the load wheels, it could indicate worn bushings or an enlarged bracket hole. Visible cracks or bends in the bracket are an obvious sign that it needs replacement. Unusual noises (scraping or grinding) from the fork tips, or one load wheel frequently getting stuck, can also indicate that the axle or bracket is damaged. 

Q: Are the wheels included in this assembly the same size and hardness as the original Crown wheels?

A: Yes. The wheels in the CR-44500-001 assembly are made to OEM specifications for the Crown PTH50. They are approximately 3.25 inches in diameter and 4.5 inches wide (tandem set side-by-side) – matching the originals to maintain correct fork height. The hardness of the polyurethane tread is equivalent to Crown’s standard (typically around 95A durometer, often referred to as “Ultra-Poly” in Crown parts manuals). This means you can expect the same durability, load capacity, and floor protection as the factory-installed wheels.

Q: What load capacity can this bracket assembly support?

A: This assembly is designed for the Crown PTH50, which is a 5,000 lb capacity pallet jack (the “50” in PTH50 indicates 5000 lbs). 

Q: How often should I inspect or replace the load wheel assemblies on my pallet jack?

A: Regular inspection is key. Many warehouse operations find they need to replace load wheel assemblies every 1-2 years under heavy use, or even more frequently if the jack is used on rough floors or carries near-capacity loads often.

Q: What advantages do polyurethane load wheels have in this assembly?

A: The advantages include: 

• Quiet operation – poly wheels are quieter on concrete than steel wheels.

• Floor preservation – the softer tread (relative to steel) won’t scrape or damage smooth warehouse floors, and it can go over small debris without chipping. 

• Traction – polyurethane has a better grip on floors, reducing slippage. 

• Wear resistance – the 95A hardness poly used in these wheels is very durable and resists flattening under static loads. 

It also handles chemicals and oil better than rubber would. In a pallet jack, using polyurethane wheels ensures you get long life and smooth performance.

Frequently Bought Together

Customers who buy the CR-44500-001 Crown load wheel bracket assembly often also purchase:

• CR-44461 Entry Roller for Crown PTH50 Pallet Jack

• CR-44506-001 Load Wheel Assembly (Wheel Only) for Crown PTH50

• CR 44648 Seal Kit for Crown PTH50